A relative decided she didn’t want a certain cat scratching post and so I asked if I could have it. She said “yes!” I brought it home and introduced it to my cats. They have been using it to the point that it was time to recover it again.
So on Tuesday, May 6, 2014, I jumped into the project. Now, this relative said she had recovered it herself and when I started to work on it, I found a TON of nails. They were everywhere.
Okay this cat scratch post was a design that I really liked. Unfortunately I did not take a before photo. Here are its features:
1. It didn’t tip over and I have two 16 pound cats that can do that very easily. So it had a nice base.
2. It was simply designed in a triangle shape. We had been repairing a larger version with cubbies and we had grown tired of the complication. This is the one that I have taken apart about 5-6 times and recovered. It is now in the shed waiting to be redesigned.
This new/old one would be easier to recover and fix. Here it is after I repaired it. After taking it apart I thinking that someone designed and created this cat tool and my relative somehow took possession along with a past pet.
3. I am thinking of creating a second cat scratch post that I could do a switch out with and therefore take my time in recovering it. So I could set one out let them use that and when they had destroyed it, I would just put the new first out and go fix the second one and have it ready.
4. This would be so much easier to fix and take apart. My cats really don’t use the cubbies. They are more interested in ripping into it with their claws.
Unfortunately, I did not take a photo of the cat scratch post before I started tearing into it. It had sisal rope on the angle post and there was rug about 20 inches on the bottom part and sisal rope then more rug at the top. Ebony did short work of the rug part. My cats are not that excited about rope although they had damaged some of it. It also had a funny textured rug on the upright post that Sneakers was using but it was not helping him and his claws are getting long. You can here them click on our floor as he walks. So I really needed something better for them to use to help with their claw care.
Here I am removing the rope:
It had a ton of nails and tacks lodged in it and those are hard to remove. I had to use my small and large crowbar and the claw part of my hammer to get them out. I have removed many nails in my time so I kinda of know how. There were very long nails 4 inches, tacks and variety of sizes of nails. This concerns me because a cat can catch their claws in all these nails. The tacks had big heads on them and that is okay as long as you secure them so the cat won’t catch on it.
I prefer to use long staples and an electric staple gun. I then use a hammer to tap the staples in place after I shoot them into the rug and wood. So I staple and then tap with the hammer and that locks them in. If the staple doesn’t engage I do it again. The staples work on one layer of rug. If the rug is thick then you will have to use nails that have a good head on them so you can remove them later. I also use screws so I can remove them with my drill.
This picture shows this design structure. The post is not on the rug base. The rug is around the base of the post. This means the post sits on the wood directly and it much more stable. Cool!
I started on the sisal rope and removed it and all the tacks. I then removed the slanted post from the upright post and the bottom flat piece which meant I had to undo the rug piece that came off the top and spilled over onto the slanted post board. I saved this because I wanted to reuse it. I cleaned up and removed all the rug, staples and nails from the slanted post and saved the pieces so I could use them as a template to cut new rug pieces. I was able to remove the funny textured rug on the upright post and not take the post off the flat base. I recovered the upright which was not to hard or cumbersome because it was still attached to the base. I just made sure the rug was set down around the base of the post. Now cutting the piece of rug for the slanted post is tricky because of the angles so I used the old pieces as templates.
Here is just portion of the nails:
Here is the photo again of the finished reupholstered cat scratch post. Notice the piece of rug that is on the top of the upright post and spills over the top and down over the angled post. I took it off and reattached that piece of rug after I secured the reupholstered angled post board. I did not want to come up through the bottom piece of board and through the thick rug with a screw or nail, it is very hard to do. So I did the attaching by screwing from the side of the bottom of the angle board. Sounds complicated but not really. I think they call it toenailing?
Once finished, Sneakers went over and tested it out. He likes to squat at the bottom of the upright post and reach up. He really dug in. Later Ebony also went after the angle post. It has withstood their assault so far. It didn’t fall over on them or fall apart. Yeah!
Making a Second One:
So the plan is to make a second one of this design of cat scratch post and when I do I will post about it so you can give it a try if you like.
Making this new one will require using a skill saw or circular saw to cut the piece. I have a Triton table that allows me to do cross-cut and it converts to a table saw. So I guess I cheat a little. I also get my hubby to do the sawing now.
You can use a circular saw free hand but please be careful and handle it safely. It usually takes me about 1/2 hour to get my courage up to use it that way and while I do that I go over in my mind how to use it safely. Most important is kick back so don’t have your body right behind it, move a little to the side and have your marks on your post or board and secure the board so it won’t move.
The circular saw fits right into the Triton with some adjusting and works great.
I have not been able to find a similar design for a cat scratch post anywhere in the stores or online that I can afford or make. This style and design is easy and I think we can get it done.
The nice thing is you can add sisal rope just about anywhere you like either on the slanted piece of board or the post piece.
Here are the dimensions.
Base: 18 x 16 inches – it is a piece of plywood about 3/8 inch thick.
Post: This is the straight piece – it is a 4 x 4 post – 25 and 3/8 ” tall
Angle board: This is a 2 x 4 piece of wood. This has tricky cuts. The bottom is at an angle and the top angle is very sharp. I have drawn an outline of the angles using the angle board and my husband figured out those angles. The top angle is 34 degrees and the bottom angle is 65 degrees. This board is 25 and 1/4 inches long.
Don’t forget the rug and I usually go to Flynn’s Carpet Cents in Lynnwood, WA. I can get pieces from them and you might be able to find a source near you that is similar. They do charge me for them about $10.00 but if Flynn is in the house you might get a freebie. HA!
For more posts about how to recover a cat gym or scratch post go to the side of this blog and check under categories for “Cat Gym Repair.” I talk about the tools you need and give other tips. Maybe someday I will put all into a PDF.